### # Qualcomm IPQ9554 vs. IPQ8074: A new comparison of leading technologies

With the growing demand for networking and the rapid development of technology, Qualcomm's two leading networking chips - IPQ9554 and IPQ8074 - have become the core choice for many high-performance routers and networking devices. While both chips are designed to deliver superior network performance, there are fundamental differences in technology. This article will analyze the technical differences between the two chips in detail and show why the IPQ9554 represents the future of networking chips.

#### Architecture and manufacturing process

**IPQ8074** :

- ** Architecture ** : Based on ARM Cortex-A53 architecture, quad-core design provides stable computing performance.

- ** Manufacturing process ** : 14nm FinFET process, this process has been proven to balance performance and power consumption.

- ** Frequency ** : The frequency of each core can reach 2.2 GHz, which can meet the needs of most network applications.

**IPQ9554** :

- ** Architecture ** : A more advanced ARM Cortex-A75 architecture, also designed as a quad-core, but offering higher single-core and multi-core performance.

- ** Manufacturing process ** : Leading 7nm process, which makes the chip far ahead of the generation in terms of performance and energy efficiency.

- ** Frequency ** : The frequency of each core is increased to 2.4GHz, making processing faster and more responsive.

** Technical Highlights ** : The IPQ9554's 7nm process and Cortex-A75 architecture not only increase processing power, but also significantly reduce power consumption, which is the future trend of high-performance chips.

#### Network performance and connectivity

**IPQ8074** :

Wi-Fi Technology ** : Support for Wi-Fi 6 (802.11ax), covering 2.4GHz and 5GHz bands, providing up to 8x8 MU-MIMO support for high-density device environments.

- ** Data throughput ** : Capable of handling high data traffic, suitable for high-speed Internet access and simultaneous connection of multiple devices.

**IPQ9554** :

- **Wi-Fi technology ** : Not only full support for Wi-Fi 6, but also further support for Wi-Fi 6E, a new 6GHz band. This means wider spectrum and lower interference, leading to faster speeds and higher capacity.

- ** Data throughput ** : Significantly improved compared to IPQ8074, able to handle higher data traffic and more concurrent connections, perfect for future network needs.

** Technical highlights ** : IPQ9554's support on Wi-Fi 6E makes it a revolutionary improvement in spectrum utilization and data transmission efficiency, ensuring that it will stay ahead in the future network environment.

#### Network acceleration and interface support

**IPQ8074** :

- ** Network Acceleration Engine ** : Integrated network acceleration engine to improve packet processing efficiency and reduce network latency.

- ** Interface Support ** : Provides multiple Gigabit Ethernet interfaces to meet high bandwidth requirements.

**IPQ9554** :

- ** Enhanced Network acceleration ** : Equipped with a more powerful network acceleration engine to further improve data processing speed and efficiency.

- ** Advanced Interface ** : In addition to Gigabit Ethernet interfaces, 2.5Gbps and 10Gbps Ethernet interfaces are also supported, ensuring excellent performance in future high-bandwidth applications.

** Technical highlights ** : IPQ9554 improves interface support to ensure that it can meet the needs of future ultra-high-speed networks and provide sufficient bandwidth for high-performance applications.

#### Energy efficiency and Thermal management

**IPQ8074** :

- ** Power Management ** : The power management of the 14nm process is mature, but complex thermal design is still required at high loads.

- ** Heat dissipation ** : Good heat dissipation design is required to maintain stable performance.

**IPQ9554** :

- ** Low power design ** : The 7nm process significantly reduces power consumption, improves energy efficiency, and reduces heat generation.

- ** Thermal Management ** : Lower power consumption means that thermal design can be simplified and suitable for smaller equipment designs.

** Technical Highlights ** : The IPQ9554's low power consumption and high energy efficiency design ensures that it provides high performance while reducing energy consumption and cooling requirements for a wider range of application scenarios.

### Conclusion

The Qualcomm IPQ9554 and IPQ8074 chips have their own characteristics, but the IPQ9554 represents the latest frontier in networking chip technology in terms of architecture, manufacturing process, network performance, interface support, and energy efficiency management. Its higher performance, lower power consumption and comprehensive support for future network needs make it ideal for high-performance routers and network devices. By choosing IPQ9554, you are choosing the future, ensuring that your network equipment will remain at the forefront of technology for years to come.

Wallys software technology advantages:

Wallys has 10 years of experience in software development and is very experienced in uboot, Linux, wifi protocol, wifi performance, OS and other systems. It mainly uses Qualcomm chips to develop important software such as drivers and kernels, and has the ability to modify and compile to meet customers' different wifi functional requirements. Meanwhile, it participates in openwrt organization and code development. wifi5 product DR40x9 has been officially supported by openwrt.

Hardware technology advantages:

We have a strong hardware design team, and experienced people know that the most difficult part of hardware design is RF circuit design, baseband, etc., while wallys team made 0 error to achieve signal integrity, such as frequency conversion of network card, from 2.4G to 900M, which is a technological breakthrough.

Clients: TIP,Facebook, Openwrt, etc

Email:sales@wallystech.com

WEB:https://www.wallystech.com/

*博客内容为网友个人发布，仅代表博主个人观点，如有侵权请联系工作人员删除。